Hardness, Iron, Manganese, Natural Organic Matter (including Tannins) and Ammonium Removal

Rid your water of hardness minerals (calcium and magnesium) and enjoy soft skin, silky hair, spot free dishes and brighter laundry while protecting your plumbing and water using appliances from scale build-up.

Removing iron and manganese will keep fixtures from getting stained as well as removing the taste and smell. Tannins, caused by decaying organic matter, are normally found in surface water systems and cause a yellow or brown color in the water that does not settle and will stain laundry.

Ammonium, often found as a by-product in water disinfected with chloramines, is undesirable and can cause bad taste and odor.

Choose the Valve that fits your project.

89 Control Valve.jpg

Reverse Flow Regeneration
with Precision Brining

Traditional "downflow" softeners deplete the unused portion of the resin bed with every regeneration. It is like draining the gas tank in your car before you fill it up! "UpFlow Regeneration" drives the hardness minerals up through the already depleted resin and out to the drain - saving both salt and the unused portion of the resin for future use.

Precision brining saves additional salt by pre-making only 70% of the brine. Just before regeneration, the computer calculates the precise amount of brine top-up needed to regenerate only the depleted resin saving up to 30% more salt.

Upflow Regeneration is available on the 89 and 785 Series hIMTLC PLUS models.

Reverse-Flow Regeneration.jpg


HIMTLC Plus Spec Sheet
# 80150143

Assembled System Warranty # 80150345

89DF HIMTLC Plus Manual
# 80150380

785 HIMTLC Plus Manual
# 80150386

565 HIMTLC Plus Manual
# 80150383

765 HIMTLC Plus Manual