Unlimited soft water supply...24

In a class by itself, TMI is engineered for the most demanding light commercial and heavy residential needs.

All water softeners require periodic regeneration when their softening capacity is exhausted. Conventional softeners can allow hard water to bypass the softener during regeneration.

The TMI Series features a twin mineral tank system governed by a meter initiated control valve. One softener tank is in service, delivering soft water, while the second softener tank is held in reserve. When the softening capacity of the service tank is exhausted, the control valve automatically switches the water flow to the reserve tank. The exhausted tank regenerates immediately and then becomes the reserve. This ensures a continuous supply of soft water without the risk of hard water getting into the service flow, making the TMI Series ideal for feed water pretreatment of commercial and industrial reverse osmosis systems.

SXT Electronic Controller

• Recommended maximum operating pressure: 100 psig (690 kPa)
• Recommended maximum operating temperature: 100°F (38°C)

Main Control Valve
• Single valve per system (two tanks) controls all softener functions
• Electro-mechanical timer controls all valve cycles including service, backwash, brine draw, slow rinse, fast rinse and brine tank refill
• Meter initated regeneration
• 9000 and 9500 control valves constructed of lead-free brass*; 9100 control valve constructed of fiber reinforced polymer
• Main piston is also lead-free* brass with a Teflon coating
• Simple threaded (NPT) inlet, outlet and drain connections

Optional Features
• 9100 control valve
• Electronic controller (XT or SXT)
• Brine tank safety float
• Optional brine tank sizes
• Sodium Chloride Dealkalizer anion resin systems (DTMI Systems)

Resin
• Premium quality ion exchange softening resin, selected for resistance to fouling and minimum salt usage
• FDA Grade

Softener Tanks and Internals
• Seamless polyethylene liner wrapped with a continuous filament wound/epoxy resin fiberglass shell
• PVC hub/lateral flow distributor and riser tube with washed quartz support bed
• Tanks up to and including 24" diameter are manufactured by WaterGroup Companies Inc. in Canada
• Brine tanks are one piece rotationally molded polyethylene with lid, air check valve assembly, brine well and grid assembly

*As defined under Section 1417(d) of the U.S.E.P.A. Safe Drinking Water Act