| Technical
Specifications |
| &
Features |
| |
| Main
Control Valve |
| •
Meter initiated regeneration |
| is
standard |
| •
Valve body constructed of |
| lead-free
brass* |
| •
Main piston constructed of |
| Teflon
coated lead-free |
| brass*
with no hard water |
| bypass
feature standard on |
| all
duplex models |
| •
Standard cycle timer |
| controls
service, backwash, |
| brine,
draw, slow rinse, fast |
| rinse,
and brine tank refill |
| •
Standard 115 volt electrical |
| requirement |
| •
Simple threaded (NPT) |
| service
inlet and outlet |
| connections |
| •
Valves used on FAF |
| softeners
in Canada are CSA |
| certified |
| Resin |
| •
Premium quality ion exchange |
| softening
resin, selected for |
| resistance
to fouling and |
| minimum
salt usage |
| •
FDA Grade |
| Softener
Tanks and Internals |
| •
Seamless polyethylene liner |
| wrapped
with a continuous |
| filament
wound/epoxy resin |
| fiberglass
shell designed for |
| 125
psig (862 kPa) working |
| pressure
and temperatures |
| of
110°F (43°C) |
| •
Hub/lateral flow distributor |
| (21"
tanks and larger) and |
| riser
tub with washed quartz |
| support
bed |
| •
Tanks up to and including |
| 24"
diameter are |
| manufactured
by Hydrotech |
| •
Brine tanks are one piece |
| rotationally
molded |
| polyethylene
with lid, air |
| check
valve assembly, brine |
| well
and grid assembly |
| |
| *
as defined under Section 1417(d) of the |
| U.S.E.P.A.
Safe Drinking Water Act |
